Double acting hydraulic cylind
發布時間：2009-09-20 來源：揚子工具集團 瀏覽次數:6476834
B 8354．1992
10．1 Test conditions When the test conditions are not available。these shall be
determined upon agreement between the purchaser and supplier．
10．1．1 0il for tests
32 0r VG 46 0f Class
The oil for the tests shall be the viscosity grade ISO VG
2 specified in JIS K 2213．
10．2 Test methods
The oil temperature shall be 50±5。C．
10．2．1 No load operation test In the no load operation test．set the pressure of
the test circuit to the minimum operating pressure，and carry out running at the
minimum speed of Table l over the total stroke not applying any load to the
cylinder．The speed control of the cylinder shall be the meter．in circuit or bleed．
off circuit which restricts the supply side．
10．2．2 Durability test ’The durability test shall be carried out under the oper-
ating conditions of Table 33．Each part of the sample cylinder shall not be ad-
justed during the test．
As t0，the switch，its electric circuit shall be operated at each sensing of the
piston．
Table 33．Conditions of durability test
|
Travelling distance of piston
|
500kmmin．
|
|
Speed of piston
|
The maximum speed ofTable l±10％
|
|
Internal pressure of cylinder
|
The oil hydraulic circuit shall be of back pressure
restriction，and the internal pressure of cylinder
at supply side shall be not less than the nominal
woring pressure．
|
|
Load mass
|
It shall be determined in accordance with At．
tached Table l an Attached Fi9.2．
|
Remarks l．The internal pressure of the cylinder shall not exceed the
permissible maximum working pressure during the test．
2．For the cylinder without cushionin9，the running direction
shall be changed over in front of the cylinder—stroke end．
10．2．3，P．．．．．r．．．．e．．．．s．．．．s．．．u．．．．．r．．．．e．．．．．．．r．．．e．．．．．s．．．i．．．s．．．．t．．．a(chǎn)．．．．n．．．．．c．．．．e．．．．．．．t．．．e．．．．s．—t— Carry out the pressure resistance test by
applying a pressure of l．5 times the nominal working pressure to the head end of
the cylinder。and l．5 times the nominal working pressure or l．05 times the maxi-
mum permissible working pressure，whichever is higher，to the rod end for 2 rain
0r more．
VV-hen the pressure is applied to the head end，the test shall be carried out
by fixing the piston at the position where the piston has just reached the rod
cover；when the pressure is applied to the rod end，the test shall be carried out
by fixing the piston at an intermediate position near the stroke end．
35
王：8354．1992
10．2．4—Oil leak—age test The oil leakage test shall be made as describe i below：
(1) External oil leakage While performing the tests specified in l0．：：．l，10．2．2
and l0．2．3，measure the amount of the oil leaking from the wiper I art of the
rod．
(2)—Internal 0—il leakage While performing the test specified in l0．2．：；，apply
the maximum permissible working pressure to one side of the pistc a，and
measure the amount of the oil leaking through the piston to the ul)loaded
pressure side．
10．2．5．T．．．．．e．．．．s．，．．t．．．．．．f．．．o．．．．r．．．．．．t．．．h．．．．．．r．．．u．．．．．s．．．．t．．．．．．e．．．．ffi．．．．．．．．c．．．．i．．e．．．．n．．．．．c．．．y—— Measure the output force at the nomi aal work--
ing pressure of a sample cylinder and calculate the ratio of it to the cyli：1der force
[Refer t0 2．Definitions(8)】．
1 1． Inspection
11．1 Type inspection The type inspection shall be carried out on the c=’linders
of new design or of remodellin9，which are considered as new design one；，for the
items enumerated below．The results shall meet the requirements of 5．·，0 8．
No loa．d operation
Durability
Pressure resistance
External oil leakage
Internal oil leakage
Thrust efficiency
Construction
Dimensions and accuracy
Appearance
Switch
11．2—Delivery i—nspection The delivery inspection shall be carried out 0‘1 the
cylinders of the same type as those which have passed the type inspectioI l and
have been ascertained as to the satisfactory performance，for the items oi(1)，(4)，
(9)and(10)specified in ll．1．The inspection items，however，may be par；ially
omitted，sumect to an agreement between the purchaser and supplier．
12．Designation The cylinder should preferably be designated by using the
number(or the title)of the standard，and names or symbols of materials)f pack．
m9，mounting type，tube bore，rod diameter symbol，nominal working Pre：；sure，
location and with or without cushionin9。stroke length and location of por l．HOW．
ever。as for the ones with the packing and gasket of which materials havf com．
bined seals，indicate the symbols of the rubber materials used．
)))))))))nv
36
B 8354．1992
Example l：
JIS B 8354 R 2 1 LA 40 8 2l N 200 A
Location of port
Location of CUShioning
and with or without
cushioning(none)
Nominal working
pressure
(21 MPa){210 k9∥cm2)
Remarks：When the material ofpiston packing and that of rod packing are the same，
2 instead of 22 may be used．
Example 2：
Double acting hydraulic cylinder SI SI TA l00 C 14 H 320 B
pressure
(14MPa)
13．—M——a—r—k—i—n—一9 The cylinder shall be clearly marked with the particulars
enumerated below or designation．However，those marked with asterisks may be
omitted．
(1) Name
(2)Tube bore
(3) Rod diameter
(4) Nominal working pressure
(5) Cushioning
(6)Length of stroke
(7) Class of external oil leakage宰
＼
(8) Shapes of piston packing and rod packin9木
(9)Type number by manufacturer*
(10)Manufacture number
(1 1)Year and month of manufacture or their abbreviations
(12)Manufacturer’S name or registered trademark
37
B 8354．1992
Exsmple：Double acting hydraulic cylinder-R-21 LA 40 8 21 N 200 A
Manufacture number or year and month of manufacture l992-4
1堪anufacturer‘S name or re西stered trademark JISC
Attached Table l．Piston speeds to be used in durability test
The piston speeds to be used in the durability test(at an actual discharg of an
oil hydraulic pump as l00 2／rain)shall be as follows：
|
Tube bore
|
Test piston speed±10％
|
Remarks
|
|
32
40
50
63
|
400
|
The maximum speed has been
restricted t0 400 mm／s．
|
|
80
|
300
|
|
|
i00
|
200
|
|
|
125
|
130
|
|
|
140
|
100
|
|
|
160
|
80
|
|
|
180
|
60
|
|
|
200
|
50
|
|
|
220
|
40
|
|
|
250
|
30
|
Informative reference：Motor capacity of pump unit for test
Approx．50 kW when 210 MPa(203．9 kgf／cm2}
Approx．30 kW when l40 MPa(142．8 kgf／cms}
Approx．15 kW when 70 MPa(71．4 kgf／cm2}
本文鏈接: http://yulechat.cn/yzgjcn_172.html
如需轉載請注明:ZOG中工液壓千斤頂http://yulechat.cn
本文章總10頁 上一頁 1 2 3 4 5 6 7 8 9 10 下一頁
上一篇:伸縮式套筒液壓缸下一編:液壓接頭和插頭尺寸規范
| 千斤頂相關知識 |
| ■伸縮式套筒液壓缸 ■液壓泵工作原理 ■液壓千斤頂維修的檢查順序和步驟 ■液壓缸掌握原始資料和設計依據 ■液壓油缸支承襯套的材料及裝配部位和裝配間隙 ■Double acting hydraulic cylind |
| 液壓千斤頂相關產品(請點擊產品名稱查看詳細資料) |
 電動千斤頂(中工F-V50-1000T) - 同步千斤頂 - 電動液壓頂(中工F-Q頂管機大行程)
|
大噸位分離式液 壓頂 |
|
薄型千斤頂(噸位5-200T行程6-80mm) - 同步薄型千斤頂(薄型中工B-V) 橋梁千斤頂(中工M-B) - 超薄型千斤頂(RSM5-150T) - 薄型千斤頂(RCS5-100T)
|
空間窄小-如橋梁 更換支座 |
|
穿心千斤頂(中工H-C空心頂) - 空心千斤頂(RCH穿心頂) - 雙作用空心千斤頂(RRH)
|
具有拉伸功能空 心液壓頂 |
|
自鎖千斤頂(中工L-V50-1080T) - 自鎖同步千斤頂 - 自鎖式千斤頂(CLL)
|
需長時間支撐重 物液壓頂 |
|
分離式千斤頂(10-200T) - 手動液壓千斤頂(5-100T) - 多節千斤頂
|
小噸位分離式液 壓頂 |
|
超高壓大噸位千斤頂(CLR) - 電動液壓千斤頂(DYG) - 大噸位液壓千斤頂(CLS)
|
大噸位液壓頂舊 型號 |
|
電動油泵(中工B-V電動泵站) - 手動泵(YSB單向) - 雙向手動油泵(YSSB) - 手動油泵(YCSB)
|
|
| 液壓千斤頂選型調查表(在括號中填上數據，并留下聯系方法，最后再提交) |
